Monday 29 June 2020

JEWEL OF JULY

While running my first challenge, I'm also wanting to take part in Azazelx challenge the-jewel-of-july-2020-community-painting-challenge I have a couple of bits I'd like to do, but the main one I finally want to finish is this Dragon from MDP, this is another one I sculpted for them, and has sat for many years collecting dust and totally neglected. Over the last couple of days I have been putting the bits together and filling any gaps.

Thinking of a red colour scheme for the dragon, and possibly yellow wings, but that may change as the painting progresses.

Have also been looking at what I would like to do for the Summer of Scenery challenge, and have sorted out a couple of GW building pieces I'd like to finally get painted, but also I'm hoping to make some new scenery pieces, some for the business, and maybe a couple of pieces that are just for me, but will share more on this in a later post.
That's the lot for this post, so until next time stay safe and have fun !
Cheers Dave

26 comments:

  1. Dragon is impressive Dave! How large is it?

    ReplyDelete
    Replies
    1. Thank you Dai, he is a pretty large kit, the straight line measurement between wing tips is 360 mm, each wing is 200 mm wide and the total length of the dragon is 420 mm from nose to tip of tail. the base is 130 mm tall. Hope these measurements give an idea of scale

      Delete
  2. Great work Dave & don't forget red ones go faster :)

    ReplyDelete
    Replies
    1. Thank you Frank, indeed ! lol

      Delete
    2. I thought it was red stripes made them go faster!

      Delete
    3. In the real world John, you would be right, in 40K a red paint gives you extra movement in an Ork army LOL

      Delete
  3. That dragon is super cool, Dave. Can't wait to see it finished.

    ReplyDelete
    Replies
    1. Thank you Harry, me too as it's been hanging around in bits for years ! LOL

      Delete
  4. That's a fairly substantial model, Dave. Should be fun to paint.

    And regretfully, due to work commitments, it's unlikely I'll have time to take part in the scenery challenge. But I shall be watching along and supporting those taking part.

    ReplyDelete
    Replies
    1. Thank you Jez, as long as I don't over complicate it, it should be good ! LOL
      Sorry to hear you won't be able to participate, but completely understand that work has to come first, and thank you for the support

      Delete
  5. That is one impressive beast. It must be th first I've seen that has irreggular finish n the trailing wing edge - great feature !

    ReplyDelete
    Replies
    1. Thank you Joe, it's something I like to do on some of the Dragons I make, to represent damage from fighting other Dragons or prey

      Delete
  6. That is a very impressive Dragon, you have done so beautiful Dragons over the years Dave, love that pose reminds me of "Reign of Fire" is that what it is based on?

    Nice little piece of scenery too, I feel like I should know what that is but can't put my finger on it!

    Cheers Roger.

    ReplyDelete
    Replies
    1. Thank you Roger, I like to vary the poses so they don't all look the same. The design came from a piece of art the client wanted it loosely based on, so as not to have any copyright infringements, but I know what you mean about Reign of Fire, except that was a Wyvern ! LOL
      The scenery is a ruined keep that was made for the Dragon, and comes as part of the kit, Had to build that part first to make sure the Dragon would fit, and look natural on top of it.

      Delete
  7. Your right of course it was a wyvern in the film. I should watch that again at some point!

    The piece of scenery I was referring to was the small Sci/Fi one at the end of the post, is that part of you "Liberator" set?

    ReplyDelete
    Replies
    1. It's been a while since I've watched it also, may have to remedy that soon ! LOL
      The bit of scenery is a charging station for bio mechanicals like Servitors in 40K, but would work perfectly well for Borg as well, their will be some scenery soon for the Blake's 7 project, so watch this space

      Delete
  8. That's a magnificent dragon. As a Welshman, I'm hoping you paint it red :-)

    ReplyDelete
    Replies
    1. Thank you Matt, as I don’t currently have a red one I’m pretty sure it will be !

      Delete
  9. Lovely looking dragon, can't wait to see it painted @
    Best Iain

    ReplyDelete
    Replies
    1. Thank you Iain, hopefully it will turn out okay

      Delete
  10. That's going to be difficult to paint if it is still attached to the tower.

    ReplyDelete
    Replies
    1. You're not wrong Phil, luckily it is only placed on the base for the pictures. It was actually a tricky part of the original sculpt, to make sure it was perfectly balanced so as not to add extra pressure on the glue points.

      Delete
  11. That's a huge model Dave, painting will be on an indistrial scale.

    ReplyDelete
    Replies
    1. Thank you John, definitely need to break out the bigger brushes for this one ! LOL

      Delete
  12. That's bloody impressive! Even moreso (like infinitely moreso) as you sculpted it!

    ReplyDelete
    Replies
    1. Cheers mate, was the third dragon I sculpted, but the last to get painted ! LOL Hopefully it will turn into a Jewel

      Delete